BYZPX - AO ACRYLIC DRY SET MORTAR ADDITIVE, 4367
- MSDS: BYZPX
- Manufacturer: AMERICAN OLEAN TILE CO
- Product Name: AO ACRYLIC DRY SET MORTAR ADDITIVE, 4367
- National Stock Number: 5610-00N064096
Product Identification
Product ID:AO ACRYLIC DRY SET MORTAR ADDITIVE, 4367
MSDS Date:09/01/1992
FSC:5610
NIIN:00N064096
MSDS Number: BYZPX
Responsible Party
LANSDALE, PA 19446-0271
US
Emergency Phone: 215-855-1111
Info Phone: 215-855-1111
Cage: 7P894
Contractor
Telephone: 215-855-1111
Cage: 7P894
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
OSHA PEL N/K
ACGIH TLV: N/K
LATEX; (ACRYLIC COPOLYMER LATEX)
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED OVEREXPOSURE TO
VAPORS MAY CAUSE SLIGHT RESPIRATORY TRACT OR EYE IRRITATION. SKIN
IRRITATION & DERMATITIS MAY DEVELOP FROM PROLONGED CONTACT W/SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EXISTING SKIN CONDITIONS.
First Aid
First Aid:CALL MD IMMEDIATELY. INHAL:REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH W/PLENTY OF WATER FOR
AT LEAST 15 MINUTES. INGEST:IF INGESTED & VICTIM IS CONSCIOUS, CALL
MD. DO NOT GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
SKIN:WASH THOROUGHLY W/SOAP & WATER OR HAND CLEANER.
Fire Fighting
Lower Limits:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . DRY POLYMER FILM CAN BURN.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:USE HIGHLY ABSORBENT MATERIAL TO SOAK UP
SPILLS. SCOOP MATERIALS INTO DOT APPROVED CONTAINER. REMOVE TO SAFE
PLACE WHERE MATERIAL CAN DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXTREME HEAT OR COLD.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. USE ONLY AS DIRECTED
ON LABEL. CLOSE CONTAINER AFTER EACH USE. DO NOT RE-USE CONTAINER.
AVOID SKIN & EYE CONTACT.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE W/ADEQ VENT. OPEN DOORS & WINDOWS & UTILIZE OTHER MEANS
TO ASSURE FRESH AIR ENTRY & EXHST. SLIGHT ODOR OF (SUPDAT)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH SKIN W/SOAP & WATER OR HAND CLEANER.
Supplemental Safety and Health
VENT:ACRYLIC MAY BE PRESENT UNTIL ADHESIVE DRIES.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Density:LTR/AIR
Spec Gravity:1.08
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:80-85
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:NONE KNOWN.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W FEDERAL, STATE & LOCAL DISPOSAL
REGULATIONS. DO NOT FLUSH ACRYLIC GROUT ADMIX DOWN DRAIN.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.